Saudi Arabia has a national medical purchaser, NUPCO, and the SFDA has adopted the GSO ISO 7396-1:2016 pipeline standard. This guide sets out what both bodies publish and what to check before you buy a PSA oxygen plant.
Two public bodies matter to a supplier of hospital oxygen plants: NUPCO, which publishes tenders, and the SFDA, which regulates medical devices and adopts standards. Both websites were read on 19 November 2026.
NUPCO, the National Unified Procurement Company, says it was founded in 2009 to unify medical procurement and is wholly owned by the Public Investment Fund. Its tenders section has open tenders, a tender plan and a tender FAQ. Each tender card shows a tender ID, the purchase type, a title, the last date for submitting bids and the bid opening date.
The SFDA’s foreword to GSO ISO 7396-1:2016, on medical gas pipeline systems (Part 1), says the standard was adopted in its original language and approved as a national standard by the SFDA board of directors. The SFDA home page also counts 163,455+ medical devices granted marketing authorization, without giving a period.
NUPCO’s pages do not mention oxygen plants, and the SFDA home page does not mention an authorised representative. This guide does not set out the registration route for an oxygen plant, because we have not found an official text that does. The national Etimad portal was not read.
NUPCO’s tender FAQ says a supplier must be registered and qualified with NUPCO before it can buy a tender booklet through the Sadad payment service.
The FAQ says initial results follow the technical and financial review, typically in 4 to 8 weeks, and final results follow the review of objections. Final results cannot be objected to once announced.
The FAQ says the annual tender plan is published on the NUPCO website. Reading it early shows what is coming before a tender opens.
The SFDA lists a Unique Device Identifications service (Saudi-DI), described as recording identifier codes for medical devices. Ask whether it applies to your plant.
Short and specific to a purchase in Saudi Arabia. The general method is in the guides linked below.
NUPCO unifies medical procurement in Saudi healthcare, but its pages do not say whether oxygen plants are tendered there. Ask the hospital whether the plant is bought through NUPCO or directly.
The SFDA has adopted GSO ISO 7396-1:2016. ULTRAOX plants are built to EN ISO 7396-1. Ask the buyer to name the standard it requires in the specification.
NUPCO requires registration. The SFDA pages do not mention an authorised representative. Ask the buyer whether a manufacturer authorisation is required, then read our guide on it.
More on the medical gas answers page.
NUPCO describes itself as the National Unified Procurement Company, founded in 2009 to unify medical procurement and wholly owned by the Public Investment Fund. Its name refers to medicines, medical devices and supplies. Its pages do not mention oxygen plants.
On nupco.com, in a tenders section with open tenders, a tender plan and a tender FAQ. Each tender card shows a tender ID, the purchase type, a title, the last date for submitting bids and the bid opening date.
According to NUPCO’s FAQ, initial results are announced after the technical and financial review, typically in 4 to 8 weeks depending on the tender. Final results follow the review of objections, which also takes 4 to 8 weeks. Once final results are announced they cannot be objected to.
The SFDA’s foreword says it adopted GSO ISO 7396-1:2016, Medical gas pipeline systems, Part 1, in its original language as a national standard. Check which standard a given tender cites.
ULTRAOX oxygen plants carry CE marking as Class IIb medical devices through notified body 1639 (SGS), with the whole plant certified as a single medical device, and are built to EN ISO 7396-1. For tenders, Ultra Controlo provides its certificates, CE declarations of conformity and technical dossiers.
UltraCare is Ultra Controlo’s technical assistance programme for its medical gas systems, available 24 hours a day, 365 days a year. It covers preventive maintenance and monitoring, corrective service, original spare parts and rental equipment while a unit is serviced.
ULTRAOX is designed for a minimum life cycle of 150,000 hours, which Ultra Controlo presents as an investment for at least 20 years.
Tell us about your site. Our engineering team sizes the configuration and sends a quote.