Ultra Controlo is a Portuguese manufacturer of PSA oxygen generators for hospitals. It designs ULTRAOX oxygen plants, assembles and tests them in its own factories in Portugal, and has systems installed in more than 80 countries.
Ultra Controlo is a Portuguese company that designs and manufactures medical gas systems for hospitals.
In Portugal: Ultra Controlo designs its systems and assembles and tests every product in its own factories there.
A PSA (pressure swing adsorption) oxygen generator makes medical oxygen on site from ambient air. Ultra Controlo’s PSA plants are called ULTRAOX; each is built around ULTRACON oxygen concentrators with two molecular sieve columns.
Oil-less ULTRACECO compressors.
View ULTRAOX SCULTRASCREW rotary screw compressors.
View ULTRAOX STA complete plant inside a shipping container, for sites with no technical room.
View ULTRAOXULTRAOX plant models range from 3.10 Nm³/h of oxygen on ULTRAOX 30 to 165.3 Nm³/h on ULTRAOX 1640, delivered at 5 to 6 bar; each plant has one or two ULTRACON oxygen generators.
Plants are modular: one or more generators and compressors are combined to match the hospital’s demand, and capacity can be added later without replacing what is already installed. To size a plant, Ultra Controlo needs the oxygen flow required in m³/h or, for cylinder filling, the size and number of cylinders to fill per day.
Connect ULTRAFIL to ULTRAOX and fill your own medical oxygen cylinders on site.
ULTRAOX plants leave the factory pre-wired, parameterised and tested, ready to start on site, and on large plants Ultra Controlo’s factory technicians supervise installation, start-up and staff training.
A Siemens controller runs the plant, switches compressors and generators in cascade to keep pressure stable, and logs every alarm.
A minimum life cycle that Ultra Controlo presents as an investment for at least 20 years, and in good conditions the zeolite can last 10 years or more.
Ultra Controlo is certified to ISO 13485:2016 for medical devices, ISO 9001:2015 for quality management and ISO 14001 for environmental management.
ULTRAOX oxygen plants carry CE marking as Class IIb medical devices through notified body 1639 (SGS), with the whole plant certified as a single medical device, and are built to EN ISO 7396-1. For tenders, Ultra Controlo provides its certificates, CE declarations of conformity and technical dossiers.
Single-stage PSA plants such as ULTRAOX produce Oxygen 93, a medical oxygen with its own monographs in the European Pharmacopoeia (Oxygen (93 per cent), 2455) and the US Pharmacopeia (Oxygen 93 Percent).
ULTRAOX plants serve hospitals for ministries of health, United Nations agencies and Global Fund programmes, in places as demanding as deserts, islands and the Amazon.
During his State visit to Cabo Verde in July, the President of the Portuguese Republic, António José Seguro, visited the Dr. Agostinho Neto Hospital in Praia, the largest hospital in the country. The hospital’s medical oxygen plant, which lets it produce its own oxygen on site, was engineered and installed by Ultra Controlo.
The oxygen production container facility has the capacity to store up to 1,500 oxygen cylinders and fill approximately 50 medical oxygen cylinders per day using an ULTRAOX medical oxygen PSA generator.
Ultra Controlo delivered and handed over four ULTRAOX medical oxygen systems to the Kingdom of Eswatini, which now has the capacity to independently produce medical-grade oxygen for hospitals across the nation.
ULTRAOX oxygen generation systems were placed at Hospital de Kati despite the difficult terrain, elevated platforms and logistical complexity of the site.
Ultra Controlo delivered a new ULTRAOX system to CHR Lomé Commune Hospital in Togo, to give the hospital a stable and reliable supply of medical-grade oxygen.
Ultra Controlo shipped 11 containers of oxygen generators for Angola’s largest healthcare project.
Compare PSA oxygen generator manufacturers on evidence, not on brochures. Ask every manufacturer the same six questions, in writing.
Ask for the CE certificate and the class of the complete plant, not only of the parts.
Ask which pharmacopoeia monograph the oxygen meets, and how purity is measured and alarmed.
Ask where the plant is assembled and tested before it ships, and by whom.
Ask how the plant hands over to the backup supply, and whether that needs an operator.
Ask who trains your technicians, where spare parts come from and what the service covers.
Ask for references with public, third-party proof: ministries, United Nations agencies or donors.
Questions hospitals ask us about on-site oxygen. More on the medical gas answers page.
Ultra Controlo is the manufacturer. It designs ULTRAOX PSA oxygen plants and ULTRACON oxygen generators, and assembles and tests them in its own factories in Portugal.
In Portugal: Ultra Controlo designs its systems and assembles and tests every product in its own factories there.
ULTRAOX plants leave the factory pre-wired, parameterised and tested, ready to start on site, and on large plants Ultra Controlo’s factory technicians supervise installation, start-up and staff training.
Ultra Controlo is certified to ISO 13485:2016 for medical devices, ISO 9001:2015 for quality management and ISO 14001 for environmental management. ULTRAOX oxygen plants carry CE marking as Class IIb medical devices through notified body 1639 (SGS), with the whole plant certified as a single medical device, and are built to EN ISO 7396-1. For tenders, Ultra Controlo provides its certificates, CE declarations of conformity and technical dossiers.
ULTRAOX plant models range from 3.10 Nm³/h of oxygen on ULTRAOX 30 to 165.3 Nm³/h on ULTRAOX 1640, delivered at 5 to 6 bar; each plant has one or two ULTRACON generators. Plants are modular: one or more generators and compressors are combined to match the hospital’s demand, and capacity can be added later without replacing what is already installed. To size a plant, Ultra Controlo needs the oxygen flow required in m³/h or, for cylinder filling, the size and number of cylinders to fill per day.
They share the same PSA oxygen generators and differ in how the air is compressed and where the plant is housed.
ULTRAOX SC uses oil-less ULTRACECO compressors. ULTRAOX ST uses ULTRASCREW rotary screw compressors. ULTRAOX CO is a complete plant built inside a shipping container, for sites with no technical room or no space for civil works. ULTRAOX treats the air before the PSA with a water separator with electronic drain, micro and sub-micro filters and an activated carbon filter.
Yes. Ultra Controlo makes oxygen plants for industry, with an optional oxygen booster for higher pressures.
They come on a skid or in a container, can replace liquid oxygen tanks or run as the main supply, and are designed for aquaculture, wastewater treatment, hydrogen sulphide (H2S) reduction, gold leaching in mines, pulp bleaching and industrial furnaces.
Yes: on large plants Ultra Controlo’s factory technicians supervise installation, start-up and staff training, and the company runs medical gas training for hospital clinical and technical teams.
Email leads@ultra-controlo.com or call +351 219 154 350 with the gases you need, the site and the demand.
For oxygen, give the flow in m³/h or, for cylinder filling, the cylinder size and how many cylinders a day. Ultra Controlo’s engineering team sizes the system from those figures.
Tell us about your site. Our engineering team sizes the configuration and sends a quote.