Manufacturer ISO 13485:2016

A Portuguese manufacturer of medical vacuum plants.

Ultra Controlo designs and builds ULTRAVAC medical vacuum plants in Portugal, on Elmo Rietschle pumps made in Germany, and has systems installed in more than 80 countries.

ULTRAVAC central hospital vacuum plant with receiver tank, control cabinet and pump rack
Vacuum level
−0.75to −0.85 bar
ULTRAVAC vacuum level
Pumps
1to 6
Per ULTRAVAC plant
Capacity
10to 1,100 m³/h
Per ULTRAVAC pump
Countries
80+
With Ultra Controlo systems installed
Experience
40years
In the hospital and industrial sector
At a glance

Who makes ULTRAVAC.

Ultra Controlo is a Portuguese company that designs and manufactures medical gas systems for hospitals.

In Portugal: Ultra Controlo designs its systems and assembles and tests ULTRAVAC in its own factories there.

Ultra Controlo
Company profile
Company
Ultra-Controlo Projectos Industriais, Lda.
Headquarters
Avenida dos Combatentes 52, Abrunheira, 2710-034 Sintra, Portugal
Vacuum range
ULTRAVAC, ULTRAVAC CLP and ULTRAVAC DENTAL plants
Pumps
Rotary vane (ULTRAVAC), contactless claw (ULTRAVAC CLP) and side channel (ULTRAVAC DENTAL)
ULTRAVAC designed in accordance with
EN ISO 7396-1:2016, HTM 02-01 and NFPA 99
Quality system
ISO 13485:2016, ISO 9001:2015 and ISO 14001
Country of origin
Portugal (EU)
Installed in
More than 80 countries
Experience
40 years
Service
UltraCare, which aims to keep the equipment working 24/7
What Ultra Controlo makes

The medical vacuum range.

ULTRAVAC is the central medical vacuum plant for the hospital network, and runs fully automatically. Ultra Controlo designs and builds it in Portugal, alongside anaesthetic gas scavenging and dental suction.

01 SuctionCentral vacuum plants for the hospital network and for dental clinics.
Capacity

From one pump to six.

ULTRAVAC has 1 to 6 pumps per plant, in 16 pump sizes from 10 to 1,100 m³/h per pump. ULTRAVAC CLP covers 60 to 950 m³/h by model, across 9 models, and is also produced with 2, 3 or more pumps.

The ULTRAVAC DENTAL model table runs from the V300, for 1 chair, to the V18000, for 60 chairs at 100% or 100 chairs at 60%.

Made in Portugal

Designed and built in Portugal.

Tested before it ships.

ULTRAVAC is delivered fully connected and pre-assembled, with pumps, filters, control panel, cables and hoses mounted and factory tested. On medium and large plants, factory technicians supervise commissioning and staff training.

Control and monitoring.

The control panel has a touchscreen HMI showing vacuum level and trends, rotates the pumps automatically by operating hours, and a backup pump maintains the vacuum level. A QuVac remote monitoring panel (4G/ETH) is optional.

Filtration without a stop.

Each branch of the duplex bacterial filter is sized for total plant flow, so cartridges are replaced on an isolated line without interrupting operation.

Standards

Designed to the hospital standards.

ULTRAVAC is designed in accordance with EN ISO 7396-1:2016, HTM 02-01 and NFPA 99, and manufactured and installed under ISO 13485:2016.

Ultra Controlo is certified to ISO 13485:2016, ISO 9001:2015 for quality management and ISO 14001 for environmental management.

Medical vacuum · ULTRAVAC
Specification
Vacuum level
−0.75 to −0.85 bar, minimum 450 mmHg at pipeline flow
Capacity per pump
10 to 1,100 m³/h
Vacuum pumps
1 to 6 per plant
Motor power
0.45 to 30 kW per pump, 400 V / 50 Hz / 3 AC
Noise level
60 to 81 dB(A) per pump
Bacterial filters
Duplex, each sized for the full plant flow
Real-world deployments

Running in Angola’s hospitals.

In 2026, medical vacuum plants were handed over with complete medical gas systems at hospitals across Angola.

AO
2026
Angola · Zango

Zango Hospital

Ultra Controlo completed the delivery, installation, commissioning and handover of the full medical gas infrastructure at Zango Hospital: an ULTRAOX PSA oxygen plant, medical air and vacuum plants and a complete MGPS distribution network.

Complete medical gas systems Read the story
AO
2026
Angola · Bocoio

Bocoio Hospital

The systems handed over include an ULTRAOX PSA oxygen generation plant, a medical air plant, a medical vacuum plant, and the corresponding accessories, all installed and validated to international standards.

Ministry of Health · UNDP Read the story
AO
2026
Angola · Luanda

Hospital Kilamba Kiaxi, maternal and child health centre

A medical vacuum plant went into operation with an ULTRAOX PSA oxygen plant, a medical air plant and the complete pipeline. The project was developed by the United Nations Development Programme for the Ministry of Health of Angola and is financed by the Global Fund.

UNDP · Global Fund Read the story
Choosing a manufacturer

What to ask any vacuum plant manufacturer.

Compare medical vacuum plant manufacturers on evidence, not on brochures. Ask every manufacturer the same six questions, in writing.

01

Which standards is the plant designed to?

Ask for the pipeline standard, such as EN ISO 7396-1, and the quality system the plant is manufactured under.

02

How many pumps, and what keeps suction available?

Ask how many pumps the plant has and what keeps the vacuum level up if one pump stops or is being serviced.

03

Which pump technology, and what does it need?

Ask whether the pumps are oil lubricated rotary vane, claw or side channel, and what maintenance each needs.

04

Where is it built and tested?

Ask where the plant is assembled and tested before it ships, and by whom.

05

How does it report a fault?

Ask what the control panel shows, which alarms it raises and whether it can be monitored remotely.

06

Who services it, and for how long?

Ask who trains your technicians, where spare parts come from and what the service covers.

Frequently asked questions

Questions buyers ask a vacuum plant manufacturer.

Questions hospitals ask us about medical vacuum. More on the medical gas answers page.

Is Ultra Controlo a manufacturer of medical vacuum plants?

Yes. Ultra Controlo designs and builds ULTRAVAC medical vacuum plants in Portugal, on Elmo Rietschle pumps made in Germany, and assembles and tests ULTRAVAC in its own factories there.

Which medical vacuum plants does Ultra Controlo make?

ULTRAVAC for the hospital network, with 1 to 6 oil lubricated rotary vane pumps; ULTRAVAC CLP, with rotating contactless claw pumps and a variable speed version; and ULTRAVAC DENTAL, for the central suction of dental clinics and colleges.

Which pumps do the plants use?

ULTRAVAC uses oil lubricated rotary vane pumps from Elmo Rietschle, made in Germany, and ULTRAVAC DENTAL uses SCB side channel pumps from Elmo Rietschle, made in Germany. ULTRAVAC CLP produces vacuum with rotating, contactless claws at high speed.

What standards is ULTRAVAC designed to?

ULTRAVAC is designed in accordance with EN ISO 7396-1:2016, HTM 02-01 and NFPA 99, and manufactured and installed under ISO 13485:2016.

Ultra Controlo is certified to ISO 13485:2016, ISO 9001:2015 for quality management and ISO 14001 for environmental management.

What capacities do ULTRAVAC plants cover?

1 to 6 pumps per plant, in 16 pump sizes from 10 to 1,100 m³/h per pump, at a vacuum level of −0.75 to −0.85 bar.

Does Ultra Controlo make dental suction systems?

Yes. ULTRAVAC DENTAL units meet the central suction needs of dental clinics and colleges. They use SCB side channel vacuum pumps from Elmo Rietschle, made in Germany, with QuVac digital control and speed variation according to instantaneous consumption.

How do I get a quote or ask an engineer?

Email leads@ultra-controlo.com or call +351 219 154 350 with the gases you need, the site and the demand.

Ultra Controlo’s engineering team sizes the system from those figures.

Request a project assessment

Ready to discuss medical vacuum for your hospital?

Tell us about your site. Our engineering team sizes the configuration and sends a quote.

ISO 13485:2016
80+ countries
40 years