Screw compressors ULTRASCREW

Screw air compressors from Ultra Controlo.

The ULTRASCREW range, supplied by Ultra Controlo, is made up of oil lubricated rotary screw compressors, in fixed speed and variable speed versions, and ULTRASCREW DS VSD adds a two-stage screw compressor with a variable speed drive for industrial compressed air.

ULTRASCREW oil-injected screw compressor, three-quarter view of the enclosure
Fixed speed
4 to 132kW
FSD in ULTRAAR ME
Capacity
22 to 1,170Nm³/h
At 10 bar, FSD in ULTRAAR ME
Pressure range
5 to 14bar
Variable speed version
Countries
80+
With Ultra Controlo systems installed
Experience
40years
In the hospital and industrial sector
At a glance

What ULTRASCREW is.

ULTRASCREW is an oil lubricated rotary screw compressor, in fixed speed (FSD) and variable speed (VSD) versions.

The VSD version is the compressor of ULTRAOX ST oxygen plants. The FSD version is the compressor of ULTRAAR ME medical air plants.

ULTRASCREW
Range profile
Type
Oil lubricated rotary screw
FSD version
Fixed speed, in ULTRAAR ME
VSD version
Direct drive, variable speed, in ULTRAOX ST
Two-stage
ULTRASCREW DS VSD, with a variable speed drive, for industrial compressed air
Air flow measurement
ISO 1217:2009, Annex C
Company
Ultra-Controlo Projectos Industriais, Lda.
Headquarters
Avenida dos Combatentes 52, Abrunheira, 2710-034 Sintra, Portugal
Plants
ULTRAAR ME and ULTRAOX ST, designed and manufactured in Portugal, in its own factories
Quality system
ISO 9001:2015 and ISO 14001
Installed in
More than 80 countries
The range

ULTRASCREW compressors and the plants that use them.

ULTRASCREW is an oil lubricated rotary screw compressor used inside Ultra Controlo medical plants, and ULTRASCREW DS VSD is a two-stage screw compressor for industrial compressed air.

01 CompressorsThe compressor range, fixed speed, variable speed and two-stage.
02 PlantsThe hospital plants that use ULTRASCREW compressors.
Capacity

The sizes in the datasheets.

Fixed speed ULTRASCREW compressors in ULTRAAR ME run from ULTRASCREW 4 FSD to ULTRASCREW 132 FSD, 4 to 132 kW, at 22 to 1,170 Nm³/h at 10 bar (370 to 19,500 L/min) and 38 to 840 Nm³/h at 13 bar (640 to 14,000 L/min), per compressor, as listed in the ULTRAAR ME datasheet.

Variable speed ULTRASCREW compressors in ULTRAOX ST are ULTRASCREW 5, 7, 11, 15, 18, 22, 30, 37, 45, 55, 75, 90, 110, 132, 160, 200, 250 and 315, at 10 bar. In ULTRAAR ME and ULTRAOX ST the compressor is sized by altitude band, up to 3,000 m.

Three ways to run

Fixed speed, variable speed and two-stage.

Fixed speed (FSD).

A star delta starter, a temperature controlled axial cooling fan, a compact footprint with easy servicing and a design optimised for low noise.

Variable speed (VSD).

Direct drive and variable speed control, IP54 motor with Class F insulation, air/oil cooling with cyclonic separator and a pressure relief valve.

Two-stage (DS VSD).

Direct-coupled two-stage screw block with direct power transmission and low compression ratios, and a variable speed drive that follows air demand.

Oil lubricated

Not oil-free, and clear about it.

ULTRASCREW is an oil lubricated rotary screw compressor. For oil-free compression, see ULTRACECO.

Whether an application needs lubricant-free air depends on the end use. The Compressed Air Challenge says lubricant-free air can be produced with lubricant-free compressors, or with lubricant-injected compressors that have additional separation and filtration equipment.

Oil-injected compressor

ULTRASCREW
Specification
Type
Oil lubricated rotary screw
FSD version
Fixed speed, star delta starter
VSD version
Direct drive, variable speed, 5 to 14 bar at constant output pressure
Control
Microprocessor controllers with communication capabilities
Noise level
68 to 79 dB(A), St Series
Air flow measurement
ISO 1217:2009 (displacement compressors: acceptance tests), Annex C
Choosing a supplier

What to ask any screw compressor supplier.

Compare screw compressor suppliers on evidence, not on brochures. Ask every supplier the same six questions, in writing.

01

Which air quality does the end use need?

Ask whether lubricant-free air is required, and whether the supplier delivers it with a lubricant-free compressor or with separation and filtration.

02

At which pressure is the capacity stated?

Ask for the capacity at your working pressure: ULTRASCREW models list a lower capacity at 13 bar than at 10 bar.

03

How does it follow demand?

Ask whether the compressor runs at fixed speed or follows demand with a variable speed drive, and how it performs at part load.

04

How are several compressors controlled?

Ask whether a sequencer or networked controllers coordinate them, and whether they can run as a group without an external master controller.

05

On which basis is efficiency stated?

Ask for data tested to the same standard, at the same conditions, in bhp or total kW input per acfm.

06

What does maintenance involve?

Ask for the service schedule per manufacturer specifications, the lubricant and separator, and whether the compressor heat can be recovered.

Frequently asked questions

Questions buyers ask about ULTRASCREW.

Questions buyers ask about screw compressors from Ultra Controlo.

Is ULTRASCREW oil-free?

No. ULTRASCREW is an oil lubricated rotary screw compressor. For oil-free compression, see ULTRACECO.

Which plants use ULTRASCREW?

ULTRAOX ST oxygen plants use the VSD version. ULTRAAR ME medical air plants use the FSD version.

What is the difference between ULTRASCREW FSD and VSD?

FSD runs at fixed speed with a star delta starter. VSD uses direct drive and variable speed control.

What pressures do ULTRASCREW compressors cover?

The variable speed version operates at constant output pressure over a range of 5 to 14 bar, with a smooth start. The fixed speed models in the ULTRAAR ME datasheet are listed at 10 bar and, from ULTRASCREW 7 FSD to ULTRASCREW 110 FSD, at 13 bar.

What is ULTRASCREW DS VSD?

A compact two-stage screw compressor with a variable speed drive, for industrial compressed air. It has an optional integrated dryer and optional heat recovery.

Can several compressors run together?

Yes. On ULTRASCREW DS VSD, several compressors can run as a group without an external master controller.

Can compressor heat be recovered?

Yes, as an option on ULTRASCREW DS VSD. An oil/water exchanger recovers the heat as hot water or as heated air.

Who supplies ULTRASCREW compressors?

ULTRASCREW compressors are supplied by Ultra Controlo. Ultra Controlo also distributes and services Gardner Denver compressors, according to its Industrial 2026 catalogue.

How do I get a quote or ask an engineer?

Email leads@ultra-controlo.com or call +351 219 154 350 with your site, the air demand and the working pressure.

Request a project assessment

Ready to discuss compressed air for your plant?

Tell us about your site, the air demand and the working pressure. Our engineering team sizes the configuration and sends a quote.

ISO 9001:2015
ISO 14001
80+ countries
40 years