Ultra Controlo trains hospital and Ministry of Health technicians to operate and maintain ULTRAOX oxygen plants and medical gas systems. On large plants, its factory technicians supervise installation, start-up and staff training.
News from Mali and Timor-Leste describes training in plant operation, preventive maintenance, system monitoring and safety procedures.
In Togo, the June 2026 programme at CHU Sylvanus Olympio covered the operation and maintenance of the oxygen generation plant and the medical gas systems installed at the hospital.
Each story below is a news item published on this site about training delivered with an ULTRAOX project.
Ultra Controlo has conducted a medical gas and oxygen plant training programme at the Centre Hospitalier Universitaire Sylvanus Olympio in Lomé, the largest hospital in Togo.
Ultra Controlo completes training and commissioning of an ULTRAOX Duplex PSA medical oxygen generator system at Hôpital Dermatologie de Bamako, strengthening hospital oxygen production capacity in Mali.
Ultra Controlo trained Ministry of Health technicians in Timor-Leste and commissioned an ULTRAOX Duplex medical oxygen production system.
Ultra Controlo delivered a medical oxygen trainer programme in Congo-Brazzaville, so healthcare professionals can operate, maintain and train others in managing medical oxygen production systems.
Ultra Controlo ran an ULTRAOX technical training session in Dakar, on the theory and practice of operating and maintaining ULTRAOX medical oxygen systems.
Ultra Controlo commissioned an ULTRAOX oxygen production system in Lofa County and gave hands-on training to local technicians and engineers to run it.
At Hôpital Dermatologie de Bamako, commissioning included operational training for the hospital’s technical teams in operation, preventive maintenance, system monitoring and safety procedures.
In the Republic of Congo, biomedical engineers and technicians trained to become certified operators and trainers for ULTRAOX systems, so they can operate and maintain the plants and teach others.
News from the Democratic Republic of the Congo and Burkina Faso report training programmes for Ultra Controlo engineers.
What UNDP and WHO say about training for oxygen plants.
| Source | What it says about training |
|---|---|
| UNDP, REQ-OXY-001 (effective 1 January 2025), section 6.7 | Comprehensive training should be provided on site during commissioning, covering equipment operation, maintenance, troubleshooting and safety procedures, and should be conducted by certified trainers from the manufacturer |
| UNDP, REQ-OXY-001, section 6.5 | The maintenance services must include a warranty covering a minimum of two years, encompassing preventative and corrective maintenance services, refresher training for users and technicians, and the supply of spare parts |
| UNDP, REQ-OXY-001, section 7.6 | Country offices should facilitate ongoing training for end users, focused on preventive maintenance, troubleshooting, energy optimization and resource efficiency |
| WHO, technical specifications (31 December 2024), section on continuous training | Certifications of trainers by the original manufacturer, details of content and modality of delivery should be agreed by all parties before a service contract; a sample training package can be requested in a tender; teams who install, test and commission are not necessarily qualified to conduct training |
Yes: on large plants Ultra Controlo’s factory technicians supervise installation, start-up and staff training, and the company runs medical gas training for hospital clinical and technical teams.
News from Mali and Timor-Leste describes training in plant operation, preventive maintenance, system monitoring and safety procedures; the Timor-Leste news also names troubleshooting procedures.
The news on this site tells of training delivered with ULTRAOX projects in Liberia, the Republic of Congo, Senegal, Timor-Leste, Mali and Togo, for hospital teams, local technicians and engineers, and Ministry of Health technicians in Timor-Leste.
In the Republic of Congo, biomedical engineers and technicians trained to become certified operators and trainers for ULTRAOX systems, so they can operate and maintain the plants and teach others.
UNDP’s REQ-OXY-001 (effective 1 January 2025) says comprehensive training should be provided on site during commissioning, covering equipment operation, maintenance, troubleshooting and safety procedures, conducted by certified trainers from the manufacturer.
WHO’s technical specifications (31 December 2024) suggest requesting a sample training package as part of the tender documentation.
Email leads@ultra-controlo.com or call +351 219 154 350 with the gases you need, the site and the demand.
Tell us about your site. Our engineering team sizes the configuration and sends a quote.