Ultra Controlo is a Portuguese manufacturer of anaesthetic gas scavenging systems (AGSS) for hospitals. It designs ULTRASEG, assembles and tests it in its own factories in Portugal, and has systems installed in more than 80 countries.
Ultra Controlo is a Portuguese company that designs and manufactures medical gas systems for hospitals.
In Portugal: Ultra Controlo designs its systems and assembles and tests every product in its own factories there.
AGSS stands for anaesthetic gas scavenging system: the system that captures waste anaesthetic gases from the patient’s breathing circuit and removes them from the operating room, protecting staff from long-term exposure.
Medical vacuum provides clinical suction at a stronger vacuum, while an AGSS removes anaesthetic gases at a much lower suction level, and its disposal system has its own standard, EN ISO 7396-2. Clinical vacuum runs at −0.75 to −0.85 bar. Anaesthetic gas scavenging runs at −0.2 bar.
ULTRASEG is an active system based on suction of anaesthetic gas mixtures from operating rooms and others fitted with nitrous oxide terminal units.
The anaesthetic breathing circuit is connected via a receiver unit to the terminal unit.
The terminal unit is generally installed close to the point of use. Its adjustable orifice allows the flow to be set for high-flow and low-flow systems.
Fully dry running, air cooled side channel vacuum blowers draw the gas mixtures at −0.2 bar. In the duplex version one pump runs while the other stands by.
Each pump delivers 50 to 315 m³/h at 50 Hz, depending on the model. Power supply is 400 V / 50 Hz / 3 AC, and weights are given for simplex and duplex.
| Model | Capacity m³/h, 50 Hz | Motor kW | Weight simplex kg | Weight duplex kg |
|---|---|---|---|---|
| ULTRASEG H50 | 50 | 0.55 | 61 | 112 |
| ULTRASEG H65 | 65 | 0.55 | 62 | 114 |
| ULTRASEG H90 | 90 | 1.1 | 77 | 124 |
| ULTRASEG H120 | 120 | 1.5 | 84 | 138 |
| ULTRASEG H170 | 170 | 2.2 | 89 | 148 |
| ULTRASEG E50 | 50 | 0.2 | 54 | 98 |
| ULTRASEG E80 | 79 | 0.4 | 55 | 100 |
| ULTRASEG E100 | 103 | 0.4 | 56 | 102 |
| ULTRASEG E140 | 143 | 0.85 | 58 | 106 |
| ULTRASEG E180 | 180 | 1.3 | 63 | 116 |
| ULTRASEG E200 | 210 | 1.6 | 68 | 126 |
| ULTRASEG E300 | 315 | 2.2 | 72 | 134 |
Other voltages and frequencies are available according to the country regulations, and other capacities on request.
Standard layouts SIMPLEX, DUPLEX and TRIPLEX, with a Manual/Stop/Auto selector and a run and fault indicator light per pump.
ULTRASEG is delivered fully connected and pre-assembled, with interconnecting cables and hoses in place, parameterised and factory tested.
ULTRASEG arrives pre-assembled, set up and tested in the factory. On medium and large plants, factory technicians supervise commissioning and staff training.
In the duplex version one pump runs while the other stands by.
Up to 20,000 operating hours between services. Preventive care is typically an annual inspection, with occasional replacement of the suction-side filter element.
ULTRASEG complies with EN ISO 7396-2, Medical gas pipeline systems, Part 2: Anaesthetic gas scavenging disposal systems.
It is Medical CE marked (CE 1639) under Directive 93/42/EEC as a Class IIa medical device, and produced under ISO 13485:2016 and ISO 9001:2015.
In Cabo Verde, Ultra Controlo installed anaesthetic gas scavenging together with medical vacuum, medical air, nitrous oxide and the full medical gas pipeline.
During his State visit to Cabo Verde in July, the President of the Portuguese Republic, António José Seguro, visited the Dr. Agostinho Neto Hospital in Praia, the largest hospital in the country. Oxygen is only part of the work. Ultra Controlo also installed medical vacuum, medical air, anaesthetic gas scavenging, nitrous oxide and the full medical gas pipeline that carries these gases to every point of care throughout the hospital.
Questions hospitals ask us about anaesthetic gas scavenging. More on the medical gas answers page.
Ultra Controlo is the manufacturer. It designs ULTRASEG and assembles and tests it in its own factories in Portugal.
ULTRASEG is an active anaesthetic gas scavenging system for the extraction and elimination of waste anaesthetic gases. It is manufactured in accordance with EN ISO 7396-2 and built in accordance with HTM 02-01, with fully dry running, air cooled side channel vacuum blowers using Elmo Rietschle technology.
Anaesthetic gas scavenging system: it captures waste anaesthetic gases from the patient’s breathing circuit and removes them from the operating room, protecting staff from long-term exposure. Ultra Controlo’s AGSS is ULTRASEG, with Elmo Rietschle side channel pumps from the H50 and E50 (50 m³/h) to the E300 (315 m³/h at 50 Hz), at −0.2 bar.
No. Medical vacuum provides clinical suction at a stronger vacuum, while an AGSS removes anaesthetic gases at a much lower suction level, under its own standard, EN ISO 7396-2. ULTRAVAC works at −0.75 to −0.85 bar and ULTRASEG at −0.2 bar.
Each pump delivers 50 to 315 m³/h at 50 Hz depending on the model, from the H50 and E50 to the E300, at −0.2 bar, with motors of 0.2 to 2.2 kW. There are 12 models, in SIMPLEX, DUPLEX and TRIPLEX layouts. Other capacities are available on request.
Yes. It is Medical CE marked (CE 1639) under Directive 93/42/EEC as a Class IIa medical device, and produced under ISO 13485:2016 and ISO 9001:2015.
Email leads@ultra-controlo.com or call +351 219 154 350 with the site, the rooms to serve and the number of terminal units.
Tell us about your site. Our engineering team sizes the configuration and sends a quote.