Ultra Controlo, a Portuguese manufacturer based in Abrunheira, Sintra, distributes and services Gardner Denver. We supply the brand’s oil-free and lubricated screw compressors, scroll, rotary vane and piston compressors, compressed air filters, carbon towers and process chillers, with genuine parts and UltraCare service.
14 Gardner Denver product families that Ultra Controlo supplies and services in Portugal, with the series names the manufacturer uses. Tell us the series or the job, and we reply with the model.
Two-stage dry screw compressors certified ISO 8573-1 (Compressed air: contaminants and purity classes) Class 0 by TÜV, says Gardner Denver; the T/TVS 90-160 gives 6.7 to 28.3 m³/min and 7.5 to 10.5 bar.
Two dry screw airends, each driven by its own variable speed permanent magnet motor; 75 to 160 kW and 4 to 10 bar, and the recovered heat gives water up to 85 °C, says Gardner Denver.
Oil-free screw compressors in which water lubricates, cools and seals the compression: 15 to 37 kW, 5 to 10 bar and 0.32 to 5.86 m³/min, says Gardner Denver.
Oil-free scroll compressors from 3 to 29 kW (5 to 40 hp), with no oil in the compression chamber, says Gardner Denver on its US site.
Lubricated screw compressors from 2.2 kW, with tank-mounted and air dryer options up to 7.5 kW, and the ESM/VS 7-22 at fixed or variable speed from 7 to 22 kW.
Fixed (ESM) or variable (VS) speed, from 30 to 132 kW and 5 to 13 bar, with optional heat recovery and, in its 30 to 45 kW and 90 to 132 kW brochures, less than 3 ppm oil carryover, says Gardner Denver.
Two-stage lubricated screw compressors with one motor and four rotors in a single semi-integrated casting: 110 to 250 kW, 5 to 10 bar and 9.16 to 47.9 m³/min, says Gardner Denver.
GDF filters cover 0.5 to 516 m³/min (at 20 °C, 7 bar); grade H removes particles down to 0.01 micron and leaves at most 0.01 mg/m³ of oil aerosol at 21 °C, says Gardner Denver.
Stainless steel housings and borosilicate glass microfibre elements developed in accordance with Regulation (EC) No 1935/2004 (materials and articles intended to come into contact with food), for 0.7 to 48 m³/min up to 16 bar, says Gardner Denver.
High-pressure filters for 1.8 to 41.6 m³/min up to 45 bar, and high-temperature filters up to 150 °C (peak 210 °C), says Gardner Denver.
Loose-fill carbon towers that remove oil vapour and odours after water separators and coalescing filters, with a nominal flow up to 5,700 m³/h (GDFT950L), leaving at most 0.003 mg/m³ of oil, says Gardner Denver.
Direct-drive rotary vane compressors from 2 to 15 hp at 100 to 150 psi, built for continuous duty, with noise as low as 65 dBA, says Gardner Denver on its US site (60 Hz).
Closed-circuit water and oil chillers from 1/2 to 200 tons, for 60 Hz supply on Gardner Denver’s US site, which lists them for injection moulding, spot welders, lasers and plasma cutting.
Piston compressors from 2 to 30 hp for intermittent duty; the R-Series is single or two-stage and splash lubricated, 80 to 175 psi, tank or base mounted, says Gardner Denver on its US site.
Sources: Ultra Controlo Industrial 2026 catalogue, pp. 10 and 12; Gardner Denver EMEIA and US websites and brochures, read on 24 October 2026.
Statements from the manufacturer’s own website and documents, each with its source.
Gardner Denver states on its EMEIA website that its oil-free compressors are certified ISO 8573-1 Class 0 by TÜV; the oil-free screw ranges it describes there are the Ultima, with two dry screw airends, the water-injected EnviroAire and the two-stage EnviroAire T/TVS.
Sources: Gardner Denver, Oil-Free Air Compressors (EMEIA) and Gardner Denver, 2 Stage Oil-Free Screw Air Compressor, EnviroAire T/TVS 90-160kW (EMEIA).
On its EMEIA website, Gardner Denver lists oil-lubricated rotary screw compressors from small 2.2 to 7.5 kW units up to the two-stage FourCore ESM/VS 110FC to 290FC, which its brochure gives as 110 to 250 kW, with ESM models at fixed speed and VS models at variable speed.
Sources: Gardner Denver, Oil Lubricated Rotary Screw Air Compressors (EMEIA) and Gardner Denver, ESM 110FC - 290FC / VS 110FC - 290FC FourCore brochure, G8 27.EN.10/23.CI (PDF).
Gardner Denver’s 2026 filter brochure sets out the benefits of changing filter elements every year, with a pressure drop indicator to show when replacement is recommended.
Source: Gardner Denver, Air Compressor Filters (EMEIA) and its GDF and GDWS brochure (gardnerdenver.com).
Every Ultra Controlo partnership includes certification, technical training, a stock of genuine parts and UltraCare, our technical support programme. For Gardner Denver equipment, that means one team for supply, parts and service.
Supply of Gardner Denver equipment, and original components in stock to keep downtime to a minimum.
Diagnosis, repair and maintenance on site by our own certified, factory-trained team, with scheduled maintenance plans for each installation.
Preventive and corrective maintenance, original spare parts and emergency support, 24 hours a day, 7 days a week.
Source: Ultra Controlo Industrial 2026 catalogue, pp. 10 and 22 to 24.
Yes. Ultra Controlo distributes and services Gardner Denver compressors and compressed air filters, and its UltraCare programme covers Ultra Controlo equipment and partner brands.
Yes. The Ultra Controlo Industrial 2026 catalogue lists Gardner Denver oil-free screw compressors for contaminant-free air, ISO Class 0, and on its EnviroAire T/TVS page Gardner Denver states that its oil-free compressors are certified Class 0 for no oil content by TÜV.
On the Gardner Denver EMEIA site, ESM models are fixed speed and VS models are variable speed lubricated screw compressors.
Gardner Denver says its oil-free compressors are certified Class 0 for no oil content by TÜV, on its EnviroAire T/TVS page.
Five manufacturers, one team for supply, parts and service in Portugal.
The series or the model, the quantity and the site, or the machine you want to replace. We reply with the price and the lead time.
