Upgrade guide ULTRAMED

Upgrade a medical air plant.

ULTRAMED is an air treatment station designed by Ultra Controlo to produce medical-grade air to European Pharmacopoeia requirements. Existing medical air plants can be upgraded with it, with no need for a new electrical control panel.

ULTRAMED medical air treatment unit, filtration column mounted on a black base
Capacity
40 to 288m³/h
Related to air at STP, 7 bar and 35 °C inlet
Sizes
9
ULTRAMED 10 to ULTRAMED 18
Working pressure
16bar
Maximum working pressure
Countries
80+
With Ultra Controlo systems installed
Experience
40years
In the hospital and industrial sector
What the datasheet says

An upgrade with no new control panel.

Existing medical air plants can be upgraded with ULTRAMED, with no need for a new electrical control panel.

ULTRAMED is a compact design for maximum space saving.

What is a medical air treatment unit?

ULTRAMED
Upgrade highlights
Upgrade
Existing medical air plants, with no need for a new electrical control panel
Dew point monitoring
Compatible with a digital dew point indicator upgrade for continuous monitoring of the air supplied to the pipeline
Changeover
Dew point dependent, for minimum purge air use. Flow rate control for parallel operation
Indicators
Visual colour change indicator for desiccant replacement, low dew point indicator alarm. Digital dew point indicator not included
Working pressure
Up to 16 bar
Inside the station

What ULTRAMED takes out of the air.

The stages the ULTRAMED datasheet lists, in the order it lists them. For medical air, Ultra Controlo advises adding a sterile air filter.

StageWhat the datasheet says
Coalescing filterRemoves water, oil and aerosols, and particles above 0.01 µm
Activated carbon filterReduces oil vapour and odours down to 0.003 mg/m³
Adsorption columnsHigh efficiency desiccant for water vapour removal, also reducing CO₂, NO and SO₂
Catalyst filterReduces CO by conversion into CO₂
Final dust filterCaptures any particulates carried over from the adsorption materials
Dew point

Changeover that follows the dew point.

ULTRAMED DS has electronic dew point monitoring that stops column changeover whenever the ideal dew point is achieved, so no more purge air is needed.

Frequently asked questions

Common questions about upgrading a medical air plant.

More on the medical gas answers page.

Can an existing medical air plant be upgraded?

Existing medical air plants can be upgraded with ULTRAMED, with no need for a new electrical control panel.

Can dew point monitoring be added to an existing medical air plant?

ULTRAMED is compatible with a digital dew point indicator upgrade for continuous monitoring of the air supplied to the pipeline. The digital dew point indicator is not included.

What does ULTRAMED DS do?

ULTRAMED DS has electronic dew point monitoring that stops column changeover whenever the ideal dew point is achieved, so no more purge air is needed.

What sizes and capacities does ULTRAMED come in?

ULTRAMED comes in nine sizes, from ULTRAMED 10 to ULTRAMED 18, with capacities from 40 to 288 m³/h, related to air at STP, measured at 7 bar and 35 °C inlet temperature. The working pressure is up to 16 bar.

Does ULTRAMED need a sterile filter?

For medical air, Ultra Controlo advises adding a sterile air filter.

Request a project assessment

Ready to discuss medical air for your hospital?

Tell us about your site. Our engineering team sizes the configuration and sends a quote.

ISO 13485:2016
80+ countries
40 years