Industrial · Pumps By technology

Industrial pumps in Portugal.

Ultra Controlo distributes and services industrial pumps in Portugal as partner brands: centrifugal, multistage, side channel, process, booster and drainage pumps from Speck Pumpen (Circutec and SPECK Neunkirchen), high-pressure plunger pumps from Speck Triplex, and diaphragm, peristaltic, piston and linear pumps from Thomas. The equipment is made by each manufacturer.

By technology

Which pump for which job?

For each technology, what the manufacturer says and the series we supply in Portugal. The figures are the manufacturers’, not ours.

TechnologyWhat the manufacturer saysSeries we supply
Vertical multistageVertical multistage pumps with all wetted parts in stainless steel, up to 160 m³/h and 250 m, says SPECK (Neunkirchen); for pressure boosting, water treatment, irrigation and fire systems.SPECK (Neunkirchen) IN-VB, IN-VC
Horizontal multistage, boiler feedHorizontal multistage modular pumps for boiler feed and condensate, in grey or nodular cast iron, PN 40 or PN 63, for water up to 120 °C and up to 110 m³/h at 50 Hz.Speck Pumpen (Circutec) ES
Standard block and stainless steelClose-coupled single-stage volute casing pumps in cast iron, up to 600 m³/h and 100 m, says SPECK (Neunkirchen); also Binero (PE coated) and Multi (plastic) versions.SPECK (Neunkirchen) Normblock, VGX, MTX
Booster setsSingle and multi-pump booster sets delivered fully wired and piped; the Multicell SFE gives up to 960 m³/h and 250 m with 2 to 6 pumps, says SPECK (Neunkirchen).SPECK (Neunkirchen) Aquacell, Multicell
Process centrifugalVolute casing pumps with mechanical seal, from 20.0 to 185.0 m³/h, for water up to 160 °C, oil up to 200 °C, and solvent and glycol mixtures, says Circutec.Speck Pumpen (Circutec) KN, KNG, KNV
Side channel and peripheralPulsation-free pumps for high pressure at low flow, able to carry gas; magnetic-drive versions give up to 200 l/min and 90 m, also for demineralised water in electrolysis and fuel cells.Speck Pumpen (Circutec) Y, NPY-MK, AY-MK, CY-MK; SKG/SKM, ASKG/ASKM
Heat transfer oilPumps for organic or synthetic heat transfer oils and for hot water; the TOEG gives 5.0 to 545.0 m³/h, and the magnetic-drive TOEM is leak-free and certified to ATEX, says Circutec.Speck Pumpen (Circutec) TOEG, TOEM
Roller vane and gearSelf-priming roller vane pumps, DS with mechanical seal and DS-MK with magnetic coupling, for outlet pressures up to 14.0 bar (50 Hz), and ZY-MK and ZY-MM gear pumps for high-pressure applications, says Circutec.Speck Pumpen (Circutec) DS, DS-MK, ZY-MK, ZY-MM
Drainage and waste waterStainless steel submersible drainage pumps, IP68 (IEC 60529, Degrees of protection provided by enclosures, IP Code), for clear to dirty water and waste water without long fibres; TOP 90 to 300 give up to 48 m³/h, says SPECK (Neunkirchen). Pumps with a vortex impeller (SAWN-F, close-coupled) or an open channel impeller with a fibre cutter (SAW-S), for industrial process and waste water and for public pools, says SPECK (Neunkirchen).SPECK (Neunkirchen) TOP, AWP, SAWN-F, SAW-S
High-pressure plungerHigh-pressure plunger pumps for clean water and non-aggressive media, from 1.2 l/min (NP10/1-170) to 500 l/min (P80) and up to 1,200 bar (P55/18-1200), says Speck Triplex.Speck Triplex P, NP, A; stainless steel R and RE versions
Piston, water supplySpeck piston pumps for water supply units, agriculture, ships and boiler feed: the S series delivers up to 45,000 l/h and the HS series reaches up to 40 bar, says Speck Triplex.Speck Triplex PM, BS, S, HS
PeristalticOnly the tube touches the fluid; flow rates from 0.1 to 3,000 ml/min, self-priming and able to run dry, for dosing cleaning agents and removing condensate, says Thomas.Thomas ETL200, ETL500, SR 18, SR 25, SR10/30, SR10/50
Liquid diaphragmOil-less, self-priming pumps from 180 to 1,800 ml/min and up to 4 bar, with wetted parts in EPDM, FKM, PTFE or FFKM, for chemical dosing, fuel cells and hydrogen generators.Thomas 1210, 5313, 6311, 6313, 6323, 6410, 6420, LMF
Linear diaphragmOil-less linear diaphragm pumps with no bearings, for sewage aeration, aquaculture and greywater treatment, says Thomas.Thomas AP, LP, LW, YP, 6025, LMG
Which brand

Which brand makes what.

Ultra Controlo distributes and services pumps from the Speck companies, from Speck Triplex and from Thomas.

Speck Pumpen introduced the brand name Circutec on 10 June 2025, according to the manufacturer; corporate names such as Speck Pumpen Walter Speck GmbH & Co KG remain for now.

Speck Triplex is a separate partner brand from Speck Pumpen, and Thomas is a third.

In its type names, R means stainless steel AISI 303 or equivalent and RE means AISI 316 or equivalent.

Partner brands

Speck Pumpen, SPECK Neunkirchen, Speck Triplex and Thomas are supplied and serviced by Ultra Controlo as partner brands.

Tell us the series, or the job, and we reply with the model.

Parts and service

One team in Portugal. From the quote to the spare part.

Our own technicians.

Diagnosis, repair and maintenance on site by our own certified, factory-trained team, with scheduled maintenance plans for each installation.

UltraCare, 24/7.

Preventive and corrective maintenance, original spare parts and emergency support, 24 hours a day, 7 days a week.

Maintenance contracts.

Scheduled preventive maintenance plans, adapted to each installation.

More from the library

Pumps in industry.

Answers on the partner brands above, from the medical gas and industry library.

Frequently asked questions

Common questions about industrial pumps.

Questions we hear about pumps in Portugal. More on the partner brands page.

Which industrial pumps does Ultra Controlo supply in Portugal?

Ultra Controlo distributes and services industrial pumps in Portugal as partner brands: centrifugal, multistage, side channel, process, booster and drainage pumps from Speck Pumpen (Circutec and SPECK Neunkirchen), high-pressure plunger pumps from Speck Triplex, and diaphragm, peristaltic, piston and linear pumps from Thomas.

Does Ultra Controlo make these pumps?

No. The Industrial 2026 catalogue lists them as partner brands that Ultra Controlo distributes and services; the equipment is made by each manufacturer.

Is Speck Pumpen now called Circutec?

Speck Pumpen introduced the brand name Circutec on 10 June 2025, according to the manufacturer; corporate names such as Speck Pumpen Walter Speck GmbH & Co KG remain for now.

What do R and RE mean in a Speck Triplex type name?

In the maker's abbreviation table, R is stainless steel AISI 303 or equivalent and RE is stainless steel AISI 316 or equivalent.

Are Thomas pumps oil-free?

The Ultra Controlo catalogue describes Thomas gas diaphragm pumps and linear pumps as oil-free.

Ask the industrial team

Tell us the job.

The pump or the technology, the quantity and the site, or the machine you want to replace.

ISO 9001:2015
80+ countries
40 years