Buyer’s guide Ten checks

How to choose an oil-free air compressor.

To choose an oil-free air compressor, compare suppliers on ten points: the air quality the process needs, oil-free or oil-injected with treatment, technology, pressure, capacity, electrical supply, control and energy, noise, air treatment and storage, and long-term service.

Two ULTRACECO SCR oil-free screw compressors, one with the enclosure door open showing the internals
The ten checks at a glance

Ten questions before you buy.

Ask every oil-free air compressor supplier the same ten questions, in writing, and compare the answers side by side.

CheckWhat to ask the supplier
1. Air qualityWhich ISO 8573-1 class does the process need?
2. Oil-free or oil-injectedOil-free compression, or oil-injected with separation and filtration?
3. TechnologyScroll, two-stage rotary or piston, and how is capacity added?
4. PressureWhich working pressure does the process need?
5. CapacityWhich flow, stated at which reference conditions?
6. Electrical supplyWhich voltage and frequency is the compressor specified for?
7. Control and energyHow does it follow the air demand, and what does it do when there is none?
8. NoiseWhat is the noise level in dBA?
9. Treatment and storageWhich dryers, filters and receivers come with it?
10. ServiceWho services it, with which spare parts?
Check 1

The air quality your process needs.

Start from the air quality the process needs, written as an ISO 8573-1 purity class.

ISO 8573-1:2010 (Compressed air: contaminants and purity classes) gives compressed air one purity class for particles, one for water and one for oil, written in that order, such as [2:4:2]. Tell the supplier the three numbers your process needs.

ISO 8573-1: compressed air purity classes

How ULTRACECO does it

The ULTRACECO SCA and SCR datasheets say that, when the compressor is completed with an air receiver, dryers and filters, the air quality will match the application requirements.

Check 2

Oil-free or oil-injected.

Ask whether the supplier offers oil-free compression or an oil-injected compressor with added separation and filtration, and which one the end use needs.

The US Department of Energy sourcebook (third edition, 2016) says lubricant-free air can be produced with lubricant-free compressors or with lubricant-injected compressors that have additional separation and filtration equipment, and that careful consideration should be given to the specific end use, including the risk and cost associated with product contamination.

What is an oil-injected compressor?

How ULTRACECO does it

The ULTRACECO SC and SCA datasheets state compression exempt of oil or grease. The ULTRACECO SCR datasheet describes a patented oil mist remover that recaptures gearcase oil mists and helps ensure oil free air compression. The ULTRASCREW is an oil-injected rotary screw compressor.

Check 3

The compression technology.

Ask which compression technology the unit uses and how capacity is added or varied.

Scroll modules, a two-stage rotary air end and a piston compressor are different machines, so compare them by technology and not only by the words oil-free.

Single-stage vs two-stage oil-free screw compressors

How ULTRACECO does it

ULTRACECO SC: oil-less scroll compressors, from one skid up to eight skids integrated in one controller.

ULTRACECO SCA: a scroll compressor, belt driven and without a gearbox.

ULTRACECO SCR: a two-stage rotary air end with a taper rotor design, at fixed speed (SCR) or variable speed (SCR-X).

ULTRACECO ESW: an oil-free piston compressor, offered with and without a canopy.

Check 4

The working pressure.

Ask for the working pressure the unit delivers and check that the process needs it.

The US Department of Energy sourcebook (2016) gives a rule of thumb for systems in the 100 psig range: every 2 psi decrease in discharge pressure decreases energy consumption by approximately 1 percent at full output flow.

How ULTRACECO does it

ULTRACECO SC and SCA: 8 or 10 bar, by model.

ULTRACECO SCR: tables at 125 psig.

ULTRACECO ESW: 10 or 14 bar, by model.

Check 5

The capacity, and how it is measured.

Compare capacities stated on the same basis.

Ask for the flow together with the reference conditions it is stated at, and check that they are the same for every supplier.

Free air delivery (FAD)

How ULTRACECO does it

The ULTRACECO SC, SCA and ESW datasheets give capacities measured to ISO 1217 Annex C at 1 bar absolute inlet pressure and 20 °C suction temperature.

ULTRACECO SCA models give 9.6 to 204 m³/h.

Check 6

The electrical supply.

Ask for the voltage and frequency the compressor is specified for, and confirm them against the supply at the site.

How ULTRACECO does it

The ULTRACECO SCA datasheet lists its motor for 50/60 Hz and 208 to 440 V. The ULTRACECO SCR datasheet gives its tables at 60 Hz and 125 psig.

For another supply, tell us about your site, including the voltage and frequency, and our engineering team sizes the configuration.

Check 7

Control and energy.

Ask how the compressor follows the air demand, and what it does when there is none.

Fixed speed and variable speed compressors answer this differently.

VSD vs fixed speed compressors

How ULTRACECO does it

ULTRACECO SCA: no idle running and progressive starting according to air demand, automatic through a QuAir PLC controller.

ULTRACECO SC: up to eight skids on one QuAir PLC controller, started and stopped automatically.

ULTRACECO SCR: fixed speed (SCR) and variable speed (SCR-X), with lead/lag capability on the controller and MODBUS and BACnet as optional communication protocols.

Check 8

The noise level.

Ask for the noise level of the unit in dBA.

How ULTRACECO does it

ULTRACECO SCR: up to 81 dBA, with full enclosure as standard, mechanical and electrical vibration isolation and a VSD fan.

Check 9

Air treatment and storage.

Decide the air treatment and the storage together with the compressor.

Compressed air leaves the compressor with water vapour, particles and, from lubricated compressors, oil. Each unit takes out one of them; which ones you need depends on the quality the air must reach.

Air treatment units

How Ultra Controlo does it

ULTRASEC keeps a constant dew point with a hot gas bypass valve; ULTRADRY reaches a pressure dew point between −40 °C and −70 °C; ULTRAK takes oil vapour below 0.003 mg/m³, with a coalescing filter upstream.

Air receivers are listed from 200 to 10,000 litres, vertical or horizontal.

Check 10

Long-term service.

Ask who services the compressor, where the spare parts come from and what the service covers.

How Ultra Controlo does it

UltraCare is the global technical support programme of Ultra Controlo: preventive maintenance, corrective assistance, original spare parts and emergency support for all Ultra Controlo equipment and partner brands.

The datasheets describe service points: filter elements replaced by wing nut on the ULTRACECO SCA, external grease fittings on ULTRACECO SCR motors of 37 kW and larger, and a belt that can be changed in 5 minutes on the ULTRACECO ESW.

Frequently asked questions

Questions buyers ask about oil-free compressors.

Questions about choosing an oil-free air compressor. More on the medical gas answers page.

What should I compare when buying an oil-free air compressor?

To choose an oil-free air compressor, compare suppliers on ten points: the air quality the process needs, oil-free or oil-injected with treatment, technology, pressure, capacity, electrical supply, control and energy, noise, air treatment and storage, and long-term service.

Does an oil-free compressor give class 0 air?

Not by itself. ISO 8573-1 classes describe the air, one each for particles, water and oil, and the ULTRACECO SCA and SCR datasheets state oil-free compression, not a class.

Do I need an oil-free compressor for food production?

Not necessarily. The US Department of Energy sourcebook (2016) says lubricant-free air can also be produced with lubricant-injected compressors that have additional separation and filtration equipment, weighed against the risk and cost of product contamination.

How do I get a quote or ask an engineer?

Email leads@ultra-controlo.com or call +351 219 154 350 with the air flow, the working pressure, the air quality and the site.

Ultra Controlo’s engineering team sizes the system from those figures.

Request a project assessment

Ready to discuss oil-free air for your plant?

Tell us about your site. Our engineering team sizes the configuration and sends a quote.

ISO 9001:2015
ISO 14001
80+ countries
40 years